Skip to main content

TV mounts

In the extension we're wiring four locations for TV's, although we only expect to have one for some time.  This is because it is difficult and expensive to put the cables in later.

We are also buying brackets for mounting two TV's now, so that they can be mounted correctly on the wall studs.

Tonight I did a quick search to find mounts.

On the Whirlpool forums I found recommendations here and here for this Ebay store, Selby Acoustics. They have actual stores in Hallam and Geelong.  I then found a link to this online guide which has suppliers and 'how to' instructions if you have to do it yourself in a completed home.

At Selby Acoustics, a 60kg rated mount, for TV's from 30" to 50", is currently reduced to $99 from a RRP of $169.  At Dick Smith Electronics, a similar mount is $399.

I'll measure the TV and its mounting holes, to see if they fit the specifications for the mount.

30/09/2010 I used "Buy it now" on Selby Acoustics Ebay Store to get one mount for $33, with free delivery, and I also bid for a larger mount and won it for $99 because I was the sole bidder. I found the same mount with a $99 "Buy it now" option afterwards, so I should have looked through the Selby Acoustics Ebay Store more thoroughly. The cheaper mount has already arrived, and I have to drive to Hallam to get the more expensive one.  The mounts are pretty well the size of our current TV, so the horizontal mounting bars may just be visible.


Popular posts from this blog

Walk-in pantry: advice for designing yours

Now we've been in our renovated home for a week, we've picked up on some minor issues that anyone considering a walk-in pantry or butlers pantry may want to consider. I think we got ours right, and the minor issues are ones we'll correct ourselves, shortly, at low cost.

 Our pantry is exactly that on most days - a pantry. There's no sink, no oven or hot plates, and no exhaust fan. It does have a microwave and a milkshake maker, storage for irregularly used appliances, and a bench top that can be worked on. We could fit plumbing for a sink later, but can't see a need right now.

Big cost savings can be made with a walk-in pantry. By having a separate room and door, there's absolutely no need for cupboards and cabinet doors within the pantry. Think of the pantry as a cupboard!  Bench tops can be practical and not showy - you don't need Corian or Caeserstone surfaces. A walk-in pantry is a separate room, so soft-close drawers to keep noise down aren't …

How to install a new garden tap for your vegetable garden

The day before the turf for our lawn was laid, I used a trenching shovel to quickly dig a trench from our existing tap on the back wall of the house, to the edge of our raised vegetable patches.

I laid a length of 25mm blue line PE pipe ("poly-pipe") and back filled the trench. I fitted a right angle elbow fitting to either end, with a short length sticking in the air, clear of the soil, so the line wouldn't become blocked.

During summer, our gardening efforts were focused on establishing the new lawn, so we didn't plant any vegetables.  Then last weekend, about six months after we laid the lawn, I completed the garden tap after speaking to a plumber about my options for connecting the pipe to the water supply.

In the end I took the easy and cheaper DIY option. At Bunnings I bought the tap fittings for the garden end, and quickly screwed it together.  A star dropper and some cable ties provide temporary support until I put in place a more substantial post.

The other …

Monkey bars!

A few months back we picked up a discounted set of monkey bars (aka horizontal ladders) from Bunnings.  They were reduced from $299 to $80 because the packaging was damaged and the bolts for attaching the bars to wooden posts were missing. There were about four sets of bars on sale.

Last weekend I started assembling them myself, using about an extra $175 worth of materials (bolts, washers, nuts, four cypress pine posts, quick set concrete).  When it came to erecting them I needed a helping hand, which I received yesterday.

In the process of working out how and where to assemble them I found that the recommended height is 1.8 - 2.0 metres, and preferably 1.8m.  Soft fall is also important, to a depth of 250-300mm for up to 2.5m around the bars (Playground Equipment Safety Bulletin, February 2011). The Bulletin provides advice about selecting soft fall materials.

We've generally followed this advice, although without soft fall for a little while. The Bulletin identifies the following…