Skip to main content

Coffee print from Store

Print from Store
One of our purchases from our visit to the Springvale Homemaker Centre was this 'coffee' print from Store.

We love our coffee.  In Store, we discussed putting the print over our kitchen bench.  However, when we arrived home we decided to mount it on the opposite side of the same wall, over our dining table.

The warm tones of the print match our furniture in the dining space.

I can imagine too that future dining guests will joke that it is our coffee menu - challenging us to make coffees from the list!

Store only has stores in Victoria at present. Store market itself as a storage super-store, and its range seems larger than Howards Storage World.  They also have some of the same stock as Howards, notably including the Elfa shelving system. Their website doesn't show their product range, so it is worth visiting a store to see the depth of what they offer.



Comments

Popular posts from this blog

Walk-in pantry: advice for designing yours

Now we've been in our renovated home for a week, we've picked up on some minor issues that anyone considering a walk-in pantry or butlers pantry may want to consider. I think we got ours right, and the minor issues are ones we'll correct ourselves, shortly, at low cost.

 Our pantry is exactly that on most days - a pantry. There's no sink, no oven or hot plates, and no exhaust fan. It does have a microwave and a milkshake maker, storage for irregularly used appliances, and a bench top that can be worked on. We could fit plumbing for a sink later, but can't see a need right now.

Big cost savings can be made with a walk-in pantry. By having a separate room and door, there's absolutely no need for cupboards and cabinet doors within the pantry. Think of the pantry as a cupboard!  Bench tops can be practical and not showy - you don't need Corian or Caeserstone surfaces. A walk-in pantry is a separate room, so soft-close drawers to keep noise down aren't …

Monkey bars!

A few months back we picked up a discounted set of monkey bars (aka horizontal ladders) from Bunnings.  They were reduced from $299 to $80 because the packaging was damaged and the bolts for attaching the bars to wooden posts were missing. There were about four sets of bars on sale.

Last weekend I started assembling them myself, using about an extra $175 worth of materials (bolts, washers, nuts, four cypress pine posts, quick set concrete).  When it came to erecting them I needed a helping hand, which I received yesterday.

In the process of working out how and where to assemble them I found that the recommended height is 1.8 - 2.0 metres, and preferably 1.8m.  Soft fall is also important, to a depth of 250-300mm for up to 2.5m around the bars (Playground Equipment Safety Bulletin, February 2011). The Bulletin provides advice about selecting soft fall materials.

We've generally followed this advice, although without soft fall for a little while. The Bulletin identifies the following…

How to install a new garden tap for your vegetable garden

The day before the turf for our lawn was laid, I used a trenching shovel to quickly dig a trench from our existing tap on the back wall of the house, to the edge of our raised vegetable patches.


I laid a length of 25mm blue line PE pipe ("poly-pipe") and back filled the trench. I fitted a right angle elbow fitting to either end, with a short length sticking in the air, clear of the soil, so the line wouldn't become blocked.

During summer, our gardening efforts were focused on establishing the new lawn, so we didn't plant any vegetables.  Then last weekend, about six months after we laid the lawn, I completed the garden tap after speaking to a plumber about my options for connecting the pipe to the water supply.

In the end I took the easy and cheaper DIY option. At Bunnings I bought the tap fittings for the garden end, and quickly screwed it together.  A star dropper and some cable ties provide temporary support until I put in place a more substantial post.


The other …